Have a shower with a very low (68") shower arm. I've found lots of S-curve shower arm extensions (examples below), but all of them seem to have IPS threads instead of NPT threads. If I use rectorseal or a combo of rectorseal and teflon tape, will I be able to get a good leak-free seal?
S-Curve Shower Arm Extension Threads & Sealing
- Thread starter Dachd
- Start date
Users who are viewing this thread
Shower arms have standard 1/2" threads.
Three wraps of tape will do, or you can also use thread sealant in a can.
Three wraps of tape will do, or you can also use thread sealant in a can.
