davidwater
New Member
I'm on my second well / pump vendor of which both have been unreliable with very poor follow up. This makes me even more reluctant to take the advice at face value. So I would like some feed back on the recommended set up. I know I have a iron and sulfur problem that I want to correct and I'm starting with just a working diagram storage tank on an existing 2 hp pump, new controller with >15 gpm output and a new 8' x 10' pump house I built. I'm currently a single person, 1,000 sqft home, 2 bath but with plans to grow. Testing results:
Hardness - 11 gpg
Iron - 2.0 ppm
PH - 8.0
Silica - 35 ppm
Hydrogen Sulfide - yes
Manganese - none
TDS - 175 ppm
Recommendation:
Charger Iron & Sulfur Breaker, 1.5 cu ft 10 x 54", 2510 SXT with carbon, Katalox & Nextstand - $1600.00
Canature WS 48,000 grain, 1.5 cu ft 10 x 54", 5600 SXT with brine tank & 150 lbs salt - $1400.00
10" Big Blue whole house filter housing kit, wrench, bracket #2 DGD-5005 filters - $185.00
Hydro Blend SC605CW for silica scaling control - $240.00
Hardness - 11 gpg
Iron - 2.0 ppm
PH - 8.0
Silica - 35 ppm
Hydrogen Sulfide - yes
Manganese - none
TDS - 175 ppm
Recommendation:
Charger Iron & Sulfur Breaker, 1.5 cu ft 10 x 54", 2510 SXT with carbon, Katalox & Nextstand - $1600.00
Canature WS 48,000 grain, 1.5 cu ft 10 x 54", 5600 SXT with brine tank & 150 lbs salt - $1400.00
10" Big Blue whole house filter housing kit, wrench, bracket #2 DGD-5005 filters - $185.00
Hydro Blend SC605CW for silica scaling control - $240.00