Newport Brass, Tempress II Shower faucet

[Terry]

Anyone know what cartridge this might take? Kinda looks like Danze, but also maybe something else.

Names updated by Marlinman to Newport, Thanks!

The lav also needs stems

 

[Marlinman]

Terry, The shower trim is Newport Brass 3-7004 and the rough is 1-594 using Temptress 2 cartridge 1-028 or 1-207 modular depending on age.

https://www.newportbrass.com/produc...ets/700/newport-365/26/polished-chrome/3-7004
https://www.newportbrass.com/products/categories/04/tub--shower/17/valves/NF/no-finish/1-594

The widespread is Newport 365 model 7000 and using 1-001 and 1-002 cartridges.

https://www.newportbrass.com/produc...ucets/700/newport-365/26/polished-chrome/7000

https://www.newportbrass.com/documents/dynamicdocuments/NWP-7200.pdf

 

[Sponsor]

 

[Terry]

 

[Terry]

Newport Brass lav faucet, needed a 16 MM deep socket, six sided and pliers to replace. A cresent wrench wasn't working.
1-001 Cold side
1-002 Hot side

 

[Rod Kahn]

Newport Brass lav faucet, needed a 16 MM deep socket, six sided and pliers to replace. A cresent wrench wasn't working.
1-001 Cold side
1-002 Hot side

I just ran into one of these myself. Crescent wasn't working on that little hex nut, and I think the brass kind of soft. I figured it needed a socket. But tried my channel lock, rocking it back and forth. and it broke loose.

Cold side appeared to be leaking. Hot side handle was stiff to turn.

 

[Marlinman]

16mm is the same as 5/8".

 

[Terry]

 

[Terry]

A few more pictures.

 

[Sagplumber23]

A few more pictures.

View attachment 88894View attachment 88893View attachment 88892

 

[Sagplumber23]

any chance do u know what those white things on inside valve are called and if u know the part number ?

 

[Neil Binda]

any chance do u know what those white things on inside valve are called and if u know the part number ?

Those are non return valves .

@Marlinman does the Grohe one work for this one 47158000?

 

[Marlinman]

Yes they will interchange.

 

[GreenToxon]

That last photo shows a similar valve, but it doesn’t have the non return valves linked above but a strainer/filter instead.
Could I replace with the non return valves?

We’ve got a drip after replacing the cartridge and the inside of the body is heavily corroded like that.