A 6" 250 ft borehole for a water well. Casing pipe 3.5" outer diameter. Installing the casing pipe all went well 2/3 down. Wanting to have a small gravel pad underneath, in my infinite wisdom I pored about a gallon of gravel around the pipe at that point. Size, give or take, up to 0.5". I thought I had sufficient clearance but now the pipe is stuck. This is all done DIY with no professional equipment present at this point.
Any ideas? Pour water, lubricant of some type, etc?
Any ideas? Pour water, lubricant of some type, etc?