manabloc hot water problem

Users who are viewing this thread

dmd

New Member
Messages
1
Reaction score
0
Points
0
Location
Tacoma, WA
Have 2 hot water ports on manifold that have no water pressure. Any ideas? The ports went to the washer. Switched from the original washer port to an unused port. The unused port worked for a few days and now it has gone dry.
 

hj

Master Plumber
Messages
33,608
Reaction score
1,047
Points
113
Location
Cave Creek, Arizona
Website
www.terrylove.com
well, you would not normally have TWO bad ports going to ONE washing machine. But the usual problem is in the connection at, or to, the washer, not the pipe to it.
 
Top