Sink Genie
www.sink-genie.com
Looking at http://www.sink-genie.com/Video3.mp4 time 2:50
I have not seen one,
Last edited:
Where does it say it doesn't need a vent?
I don't see a printed data sheet or installation instructions, which is annoying.
Cheers, Wayne
Its all about the swivel! what if the santee isn't in absolutely perfect alignment with the tailpiece. just like a p-trap you don't need a perfect rough in the trap has swingCan someone explain to me why in all their photos they have a 90° down bend? Why is this even needed, instead of just having a sufficiently long drain tube coming down from the sink so that the outlet pipe just goes straight into the wall the way it normally is with regular bottle traps?
View attachment 86892
I think my bill would have been $29,000. Then you could say "hey I saved you $1000 you should be happy."Looks like a modified bottle trap. I don't see any reason it wouldn't be acceptable by the UPC which allows bottle traps so far as the down tube is corrosion resistant. I might actually pick up a few.
I had a customer who is a jewelry designer for super wealthy people. She called because she had lost an earing she had made for Magic Johnson.. I assured her that the heavy gold ring wouldn't have made it through the trap. But it wasn't in there. She was really upset at losing a $30k earing... So before I put the trap back, I peered down the trap arm, which was over 2ft long!! and I could see it teetering on the lip of where the ABS pipe and the San Tee mated.. it had caught on that minute lip. So when I presented her the invoice I placed the ring under the top carbon sheet and she found it as she was signing the $200 bill for the call... pretty happy at that point.. but not happy enuf to give me a tip!
This is awkward, but...
It looks like you're using an ad blocker. We get it, but (1) terrylove.com can't live without ads, and (2) ad blockers can cause issues with videos and comments. If you'd like to support the site, please allow ads.
If any particular ad is your REASON for blocking ads, please let us know. We might be able to do something about it. Thanks.