Help with DWV design

Users who are viewing this thread

belafonte

New Member
Messages
1
Reaction score
0
Points
1
Location
NC
Hello,

I'm trying to design my DWV system for a toilet that's recently been relocated. I don't have the space to just drop it vertically, then do a long 90 to then run and reach the horizontal stack. What I was thinking, is to do a 45 after the first few inches coming off the toilet, then immediately another 45 before connecting to the 90. Would this allowed?
unnamed.jpg
 

wwhitney

In the Trades
Messages
6,554
Reaction score
1,838
Points
113
Location
Berkeley, CA
Looks like you might be able to eliminate the second 45 by rolling the LT 90 by 45 degrees.

Cheers, Wayne
 
Top
Hey, wait a minute.

This is awkward, but...

It looks like you're using an ad blocker. We get it, but (1) terrylove.com can't live without ads, and (2) ad blockers can cause issues with videos and comments. If you'd like to support the site, please allow ads.

If any particular ad is your REASON for blocking ads, please let us know. We might be able to do something about it. Thanks.
I've Disabled AdBlock    No Thanks