Hello I am experiencing hardness leak at the end of the cycle (when there are about 70 gallons left before reserve) and I was trying to readjust the settings of my Pentair Fleck 5800XTR2 to readjust to avoid this. Since the softener is new, my water doesn't have iron and it's from the city service I don't think the problem is in the softener itself but probably in its configuration.
My problem comes from the following: there are independent settings for hardness level, for capacity, for salt usage and for the times associated with each phase of the regeneration cycle.
Would just lowering the capacity a bit would accomplish what I'm looking for?
I can use any help I can get
Thank you so much in advance.
My problem comes from the following: there are independent settings for hardness level, for capacity, for salt usage and for the times associated with each phase of the regeneration cycle.
Would just lowering the capacity a bit would accomplish what I'm looking for?
I can use any help I can get
Thank you so much in advance.