Delta Monitor Question

Users who are viewing this thread

jammin

New Member
Messages
11
Reaction score
0
Points
0
I have just installed a Delta Monitor #1748 Shower/Tub valve and I was checking it out to prior to installing the tub surround. I have good flow when I turn on the hot water only, but if I turn on the cold water only and adjust the temperature knob to cold, I just get a dribble. Am I doing something wrong, or is it a bad valve? The o-rings and seats are installed correctly per the instructions.
 

hj

Master Plumber
Messages
33,613
Reaction score
1,054
Points
113
Location
Cave Creek, Arizona
Website
www.terrylove.com
Monitor

It sounds like the pressure balancing spool is stuck at one end. Sometimes you can take the cartridge and tap it against something to get it moving again.
 
Top