Clawfoot Drain with Island Tub Adapter

[Apprentice77]

Good morning! We had a plumber come out and relocate our jetted tub drain for a freestanding clawfoot; however, they installed a very ugly Frankenstein drain system (see attached). Additionally, the drain is not long enough to get inside the island tub so I would have had to add another extension.

Are there any brass overflow drain systems that have an extended lower tube so it would work with the island tub drain? Or would I have to find a custom setup? It’s 16” from overflow to center of the T, 9” from drain to the T, and 6” from the ground to the T (which means I’d need an additional few inches for the island drain extension).

Thanks for your help!

 

[Marlinman]

This is a Trim To The Trade fully plated for exposed tub wastes. The tube below the tee can be unthreaded fir a longer one. Also the tee can be turned to allow water to flow parallel to the floor. They have many finishes to choose from.

16” Tip-Toe Waste and Overflow for Freestanding Tubs | 4T-1804A – Trim to the Trade

trimtothetrade.com