Dmlaero
New Member
I think I understand the principles, but I don't do this often so just looking for someone to check over my planned settings to make sure I didn't screw something up.
I've based this on a using a 7.2 lb/cuft salt dose to achieve 22,700 gr/cu-ft capacity which gives me a total system capacity of 56,700 grains. That will require an 18 lb salt dose which will be delivered by drawing 6 gal of brine, so at 0.25 gpm I need a BF time of 24 min. Hardness tested at 22 grains, so I'm estimating usage to be 6600 grains per day (4 people x 75 gal/day) which will will trigger a regen every 8.5 days.
------------------------------
Resin Vol: 2.5 cu-ft
BLFC: 0.25 gpm
DLFC: 4.0 gpm
Injector: #3
------------------------------
DF: GAL
VT: 5810
RF: dF2b
CT: Fd
C: 56.7
H: 22
RS: cr
DO: 21
RT: 2:00
B1: 7
BD: 60
B2: 3
RR: 7
BF: 24
FM: t1.2
RE: OFF
VR: OFF
I've based this on a using a 7.2 lb/cuft salt dose to achieve 22,700 gr/cu-ft capacity which gives me a total system capacity of 56,700 grains. That will require an 18 lb salt dose which will be delivered by drawing 6 gal of brine, so at 0.25 gpm I need a BF time of 24 min. Hardness tested at 22 grains, so I'm estimating usage to be 6600 grains per day (4 people x 75 gal/day) which will will trigger a regen every 8.5 days.
------------------------------
Resin Vol: 2.5 cu-ft
BLFC: 0.25 gpm
DLFC: 4.0 gpm
Injector: #3
------------------------------
DF: GAL
VT: 5810
RF: dF2b
CT: Fd
C: 56.7
H: 22
RS: cr
DO: 21
RT: 2:00
B1: 7
BD: 60
B2: 3
RR: 7
BF: 24
FM: t1.2
RE: OFF
VR: OFF