AlbertPecoraro
New Member
Hi everyone. First-timer on this forum. I've done some light plumbing DIY projects in the past, but not a complete bathroom. First time dealing with drains and venting.
I showed this picture to a local plumber, and he said in Ohio I should be able to configure the plumbing for the 3 fixtures (sink, toilet, shower) as specified in the picture and it becomes a wet vent system. (Assume all connections have couplers or connectors where needed).
The only other question I have is would I have to insert a clean-out on the 3" stack of the rough-in underneath the sanitary tee?
Wanted to run this question by a public forum to see if anyone else out there has any other suggestions. I am trying to keep this as simple as possible. I added the original photo so contributors can markup that copy and share their ideas.
Thanks in advance!
I showed this picture to a local plumber, and he said in Ohio I should be able to configure the plumbing for the 3 fixtures (sink, toilet, shower) as specified in the picture and it becomes a wet vent system. (Assume all connections have couplers or connectors where needed).
The only other question I have is would I have to insert a clean-out on the 3" stack of the rough-in underneath the sanitary tee?
Wanted to run this question by a public forum to see if anyone else out there has any other suggestions. I am trying to keep this as simple as possible. I added the original photo so contributors can markup that copy and share their ideas.
Thanks in advance!