Alectrician
DIY Senior Member
- Messages
- 688
- Reaction score
- 0
- Points
- 0
But if I should post a new thread please let me know..
Too late. But now you know.
Ancient threads are better off in the boneyard.
Do I run #6 awg NM romex for the 75' indoor section and pull THHN through pvc conduit for the outdoor 25' section? Or should I run the THHN all the way?
Either way.
Typically, running the NM thru the structure is easier than running pipe and conduit.
If you are going to sleeve the NM in conduit anyway, you might as well THWN the whole way.