3/4 PEX to 1/2 copper adapter?

Discussion in 'Plumbing Forum, Professional & DIY Advice' started by plumber69, Nov 17, 2020.

  1. plumber69

    plumber69 In the Trades

    Joined:
    Jun 20, 2014
    Location:
    Prince Rupert, British Columbia
    I know I can use a Sharkbite, or even bush it down to 1/2 PEX. My current solution is a 3/4 copper bushing with a 3/4 female PEX adapter. Does PEX make an adapter like this, so I wont lose inside diameter. Basically 3/4 PEX X 1/2 CU
     
    plumber69, Nov 17, 2020
    #1
  2. fitter30

    fitter30 Well-Known Member

    Joined:
    Feb 2, 2020
    Occupation:
    Retired service tech
    Location:
    Peace valley missouri
    That's a standard fitting. 1/2" PEX . 485"id need 5 /8 to be closer to 1/2" copper. Plumbing 1 /2 copper is id, refrigeration OD
     
    fitter30, Nov 17, 2020
    #2
  3. Sponsor

    Sponsor Paid Advertisement

     
  4. plumber69

    plumber69 In the Trades

    Joined:
    Jun 20, 2014
    Location:
    Prince Rupert, British Columbia
    Meant 3/4 PEX X 5/8 cu adapter
     
    plumber69, Nov 17, 2020
    #3
  5. Reach4

    Reach4 Well-Known Member

    Joined:
    Sep 25, 2013
    Location:
    IL
    Reach4, Nov 17, 2020
    #4
    Tuttles Revenge likes this.
Similar Threads: copper adapter
Forum Title Date
Plumbing Forum, Professional & DIY Advice Replace compression fitting with soldered copper adapter? Aug 19, 2020
Plumbing Forum, Professional & DIY Advice Copper to PEX adapter question Feb 20, 2020
Plumbing Forum, Professional & DIY Advice Stainless steel bushing inside copper female adapter Jul 22, 2018
Plumbing Forum, Professional & DIY Advice Sharkbite or adapter to go from copper PEX barb to PEX tubing? Jun 12, 2018
Plumbing Forum, Professional & DIY Advice Which adapter is require to connect 1-1/4" copper drain line to a 1-1/2" PVC trap? Dec 16, 2017

Share This Page