stainless steel

I have an HTP Phoenix (rebranded as Westinghouse) 50 gal WH needing a new anode rod. On this model, it's only 12" long and is installed horizontally. I am considering a Corro-Protec powered anode as it's also 12" long and being titanium shouldn't adversely interact with the stainless steel (my...

Hello, first post and I decided to ask my question here because I'm going in circles and driving myself absolutely crazy. My situation: Running a 700' long, 1-1/4" 200 PSI (SIDR9) polyflex (ADS) line from shop to my house. Along the way I want to install a non-freeze yard hydrant. I planned to...

The manufacturer of the new Garbage Disposal we are installing in a couple days says IF you have a stainless steel sink do not use plumber putty under the sink flange when installing, use the rubber gasket they provide instead. Well, I understand they are the manufacturer, but I am more...

I am brainstorming how many condo owners have in the past on how to add a water softener when the condo has a central hot water boiler. I understand I would have to have a softener for both the cold water and hot water sources in my condo that come in under the master bedroom sink. Without...

Here are some pictures of a sink replacement in an older home. Kohler makes a nice stainless sink replacement for those. Here is the old sink and piping that was removed. The wrong way. There should have been only one trap for this. New basket and disposer, the Insinkerator 880LT 7/8 HP...

I recently had my 10 year old tankless water heater replaced with a similar model by a professional plumber. The plumber didn’t replace every part though. Actually, he used many of the previoius parts and I was wondering if it was acceptable. They did replace the 2 new vent adapters at the...