irrigation pump

He All, I’m looking to set up an irrigation system to water 3 acres of fruit trees, 2 acres of commercial flowers, and provide personal fire defense in Northern California. The water source is a pond (avg 6’ deep, 150’ across, and 20’ below the fields) fed a creek that goes dry from mid...

Please see pics. The pump worked a lot longer that I expected. When we moved here last July the bottom was already largely destroyed by the rust. It finally stopped working. You hear the electricity engaging but the rotor does not move at all. It is 3/4 HP Sta Rite SND-L Projet. I thought I...

I have a cheap DRUMMOND 1 HP Cast Iron Shallow Well Pump With Pressure Control Switch. I have 6 zones on a 1/4 acre lot with only 4-5 heads running at a time. The pump had not run in a few months and it was failing to prime so I called a sprinkler and irrigation company out to fix my...

I just purchased a home with an in-ground irrigation system. I noticed an unusual plumbing setup and can't make much sense of it. The water main (city water) enters the basement below ground on the north side, and I can follow the copper pipes to a spigot outside the north wall. On the south...

I am installing an irrigation system that will draw water from a lake. Total run will be 250 feet at a total elevation of 30 feet. What size submersible pump do I need and does anyone have any suggestions? I appreciate your time and expertise with this matter.

My challenge: Not enough water pressure at pressure tank to engage the pressure switch (cut off). The pump stays on 100% of the time the power is on. The following have been installed: - Flotec FP5172 1.5HP Sprinkler Pump, running on 220/230 (18' vertical height above the creek) -...