hard water iron softner

Hey everyone. My house has a softener that I know was purchased over side because it’s 80,000 grain for a 3 person house. The thing mows through salt, can I adjust the settings to save on salt as much as possible? Hardness of the water at the house is 15. We use well water and have a lot of...

Hi, I need help updating my system. Here is a summary of my well water: PH: 8.5 Hardness 183 ppm (about 11) Phosphate 2260 ppb Iron: 0 Alkalinity: 349 Sulpher smell (rotten egg) Tannin 0.6 cyanuric acid 2 ppm TDS 460 I currently have 2 - 120 gallon holding tanks with a chlorinator to get rid...

Let me start by saying I've been scouring the web to try and figure out what to do for my water situation. Only finding bits and pieces that pertain to me I thought it best to just lay out my situation and see if I could get answers here. I am CLEARLY not a plumber so I'll lay out as much...

I got my water tested with a Kar labs 90 kit. This is for our cabin, 1.5 baths and there are 3 of us. The usage will be minimal, mostly weekends and a bit more in the summer. Recommendations please. The results are: Hardness 138 mg/L (as CaCO3) Hardness (gpg) 8.1 grains/gallon PH 7.9 Iron...