MK_Chicago
Member
Hi All,
We purchased a new bathroom vanity that is taller and requires the supply lines be raised up ~9" and the drain about 5". I believe I am good on the drain (correct my plan below if anything seems incorrect) but I am a rookie with the PEX and not quite sure how to handle the supply lines.
Supply Lines Questions
Drain Plan
Appreciate any advice you can provide. Thank you.
We purchased a new bathroom vanity that is taller and requires the supply lines be raised up ~9" and the drain about 5". I believe I am good on the drain (correct my plan below if anything seems incorrect) but I am a rookie with the PEX and not quite sure how to handle the supply lines.
Supply Lines Questions
- Can these type of PEX connections be removed or do they need to be cut off? If so, can anyone provide some direction on how they are removed?
- Once removed, I assume I will need to add some type of coupling (and a small run of PEX to get the additional length) so looking for a recommendation for what type of coupling would be recommended. (I do not have any crimping tools)
Drain Plan
- Cut out existing sanitary tee, add a 5" piece of PVC and a coupling to bring it up 5" and install a new sanitary tee that is 5" higher.
Appreciate any advice you can provide. Thank you.