I am putting together 2 bathrooms and just want to make sure I am not missing anything when it comes to the plumbing pieces for the Shower units especially picking the right rough in's, etc.
First Bathroom is the Master - no tub, just a walk in. The idea is to have a handheld unit, a wall head and a rain/overhead unit. Its thermostatic control and each unit has its own lever so I can have any combination of the 3 units on at any time.
Thermostatic Control Valve Trim Qty 1
Thermostatic Rough In Qty 1
Rain Showerhead Qty 1
Wall Showerhead Qty 1
Ceiling mount Qty 1
Volume Control Valve Qty 3
Hand Shower Qty 1
Volume Control Trim Qty 3
Wall Mount Qty 1
Second bathroom is a hall/guest bathroom with a Tub. Going for a simpler approach:
Shower head
Pressure Balance Valve
wall mount
Rough In
Tub Spout Diverter
I am sure as this progresses I may have additional questions - so thanks in advance for the help!
First Bathroom is the Master - no tub, just a walk in. The idea is to have a handheld unit, a wall head and a rain/overhead unit. Its thermostatic control and each unit has its own lever so I can have any combination of the 3 units on at any time.
Thermostatic Control Valve Trim Qty 1
Thermostatic Rough In Qty 1
Rain Showerhead Qty 1
Wall Showerhead Qty 1
Ceiling mount Qty 1
Volume Control Valve Qty 3
Hand Shower Qty 1
Volume Control Trim Qty 3
Wall Mount Qty 1
Second bathroom is a hall/guest bathroom with a Tub. Going for a simpler approach:
Shower head
Pressure Balance Valve
wall mount
Rough In
Tub Spout Diverter
I am sure as this progresses I may have additional questions - so thanks in advance for the help!
Last edited: