The shut off valve of the supply line is currently 6 inch off centre from both the floor and flange.
Will it still work with the Toto Aquia? I'm assuming it will be directly behind the left side of the skirt, but if the valve was shortened to 4in will it work? The valve knob is like the wheel you turn - vintage style.
I've considered the dahl skirted toilet kit but it doesn't come in gold or brass finish (to my knowledge). All of our fixtures including the p-trap and hot/cold shut off valves are gold finished in 18k plated so it would look off if this stuck out in chrome.
Would really appreciate some feedback and help. I totally screwed up not considering these factors prior to renovations. With the wall tiles installed we now have an 11in rough-in from our previous 12in rough-in, and I could have easily moved the supply line valve over had I ahead.
Will it still work with the Toto Aquia? I'm assuming it will be directly behind the left side of the skirt, but if the valve was shortened to 4in will it work? The valve knob is like the wheel you turn - vintage style.
I've considered the dahl skirted toilet kit but it doesn't come in gold or brass finish (to my knowledge). All of our fixtures including the p-trap and hot/cold shut off valves are gold finished in 18k plated so it would look off if this stuck out in chrome.
Would really appreciate some feedback and help. I totally screwed up not considering these factors prior to renovations. With the wall tiles installed we now have an 11in rough-in from our previous 12in rough-in, and I could have easily moved the supply line valve over had I ahead.