Toilet for 10" rough-in but with requirements!

Discussion in 'Toilet Forum discussions' started by fatdaddy, Mar 25, 2010.

  1. fatdaddy

    fatdaddy New Member

    Messages:
    64
    Location:
    Connecticut
    I am tiling a friends bathroom and I think she has a 10" rough-in. I have not measured it exactly yet,but I think that is what she has.
    She wants:

    round bowl
    ADA compliant
    normal install (no skirt)
    Toto if she can.

    I have never installed the Uni-fit feature so advice is welcome re:that.
    Water supply is,I am assuming,6" from center of waste pipe.Again,I have to double check.

    Any toilets fit the above requirements?
    Thanks in advance.
  2. jadnashua

    jadnashua Retired Defense Industry Engineer xxx

    Messages:
    22,003
    Location:
    New England
    You may find a comfort height round toilet, but will find more elongated, as it takes elongated to be ADA. The unifit adapter only works on a select few toilets, and all of them are skirted, so it sounds like you don't have to worry about that. The Drake II is now available in a 10" rough-in, and I'd look over that on the www.totousa.com website to see if it meets her requirements. the Drake is a fine toilet - I put two in at my mother's house.
  3. fatdaddy

    fatdaddy New Member

    Messages:
    64
    Location:
    Connecticut
    Will do. Thanks.
  4. Peanut9199

    Peanut9199 Customer Service Manager Plumbing Wholesale

    Messages:
    875
    Location:
    Ontario, Canada
    The Drake II is not available in a 10" rough-in, the Drake is and it's only elongated.
  5. Terry

    Terry Administrator Staff Member

    Messages:
    15,002
    Location:
    Bothell, Washington
    The Aquia comes in a 10" rough.
    I just picked up four of them for stock.

    Or the 10" Drake, CST744EF.10

    Both of these are elongated with the Universal height bowls.

    [​IMG]
    Last edited: Mar 12, 2012
  6. Peanut9199

    Peanut9199 Customer Service Manager Plumbing Wholesale

    Messages:
    875
    Location:
    Ontario, Canada
    I didn't realize the 10" Drake was Universal height, thanks (learn something new everyday).
Similar Threads: Toilet rough-in
Forum Title Date
Toilet Forum discussions Toto 10" Rough-in Toilet vs 12" with unifit May 6, 2014
Toilet Forum discussions Cadet PRO Elongated Toilet 10" Rough-In 1.6gpf Nov 29, 2013
Toilet Forum discussions Need unusual toilet with 20" rough-in Oct 25, 2013
Toilet Forum discussions Need recs for 3 toilets with varying rough-in depths and poorly placed supply lines Jan 25, 2013
Toilet Forum discussions You've heard this before - offset flange versus toilet with shorter rough-in Aug 24, 2012

Share This Page