Search results

Please...need some help. I am trying to add a receptacle in my garage. The easiest run is to come off a light that operates a two way switch, tie in and drop the line from there. Here is where I don’t know what to do. Inside the box there are 3 white wires tied together with a leg...

I just had a brand new 3.5 ton Trane put in our Townhouse, XB14 and XR80. It replaced a 4.0 Carrier. My concern is this, as old and beat as the Carrier was, if I set it to 73 degrees regardless of the outside temp, it went to 73 degrees. This new unit runs all day and never get to 73 degrees...

Hello all - I am putting a GFCI in the bathroom and need some help. 1) there are three wires in the receptacle box BWG and that's it. My question is, if this box is at the end of the run does a GFCI really have any benefit? 2) there are 4 leads on the switch, Line (incoming) and the...

First, I'd like to thank everyone on this site and for helping me with so many things, you all have saved me a ton of cash. Thanks! Here's my question - I am remodeling my bathroom. I opened the wall to move the water pipes/drain down a couple of feet so the vanity fits. However if I do...

I need to change the Pressure Gauge on my well, can someone tell me how to do this? Is there a place where I can purchase, and what is the best type. Is there a standard size? Thanks, Steve

The wire that is in-place to supply the dishwasher, can I jump off of it to run a connection to a future disposal? I was thinking that I could hook both to a junction box, run a switch for the Disposal and put plugs on both appliances and plug into the receptacle. Thanks, Steve

The pressure gauge is reading a 100+ psi (maximum range), it normally reads 50 psi. Everything seems to be running fine. Pressure is the same in the house as usual, pump is not running constantly, all seems normal except the gauge reading. Should I be worried, will the tank explode? Do...

I am looking for some help on finding a some replacement parts for a Moen Shower faucet. I sprayed some cleaner that corroded the spigot and the plate that closes that drain ( don't know what that is called). They are gold plated fixture but don't know how to go about finding the right...

I ran a sprinker line from my well...the same well that feeds the house. When I trenched I ran an electric run to the shed using the same trench used by the PVC water run. I used underground electric wire. My well has it's own breaker. Is/was this ok? Thanks

I need some help understanding why there is a lack of water pressure coming from the kitchen fauset, It seems like about 25% of what it should be. I checked the values underneath and they are opened all the way. This is a Townhouse that is on city water. In the garage there are pipes with what...

Recently I had some work performed on my well and water purification system (new pressure switch, new control box, etc.). I was cleaning the weeds from around the water purifcation tanks, pump, etc., had one hand on the well pump metal pipe and the other hand touch the pressure switch at which...