I am hopeing someone can assist:
I have a thermolec electric boiler TH600-M the high voltage is not a problem.
I have a 2500 sq foot home with six zones. Two sets of three zones are each tied into a Taco ZVC403 Zone Valve Controls.
I have two Manifold Circulating Pumps (Grudfos)- Each running three zones.
I have an outdoor sensor.
The actuators are 24v with end switch four wire (2 red and 2 yelloow)
I am hoping someone can assist with tieing all of these peices together.
Each zone has its own thermostat with a 18/4 wire.
I have a thermolec electric boiler TH600-M the high voltage is not a problem.
I have a 2500 sq foot home with six zones. Two sets of three zones are each tied into a Taco ZVC403 Zone Valve Controls.
I have two Manifold Circulating Pumps (Grudfos)- Each running three zones.
I have an outdoor sensor.
The actuators are 24v with end switch four wire (2 red and 2 yelloow)
I am hoping someone can assist with tieing all of these peices together.
Each zone has its own thermostat with a 18/4 wire.