codmanri
New Member
I have a water neutralizer, aquapure cbw1501. The last few times it has auto-started the regeneration cycle it stayed in constant backwash and never completed - water just kept draining for an extended period of time. I had to manual turn the dial to get it to trigger the end of the cycle and stop draining water out.
If i start the cycle manually it never seems to go past the first few pins (shouldnt it only be 2 mins/pin?). The clock still appears to be keeping time.
I am new to these systems and trying to figure out what needs to be replaced or if there is any further troubleshooting i can do. Also wondering how long I should be expecting the backwash/drain cycle to take if working properly? Appreciate any help/advice.
If i start the cycle manually it never seems to go past the first few pins (shouldnt it only be 2 mins/pin?). The clock still appears to be keeping time.
I am new to these systems and trying to figure out what needs to be replaced or if there is any further troubleshooting i can do. Also wondering how long I should be expecting the backwash/drain cycle to take if working properly? Appreciate any help/advice.