PatrickVespin
New Member
I have 2 new Vespin II that we just had installed. One has the water in the bowl about 1/2 inch deeper than the other. The lower one has a water level about 1/2 below the first curve of the bowl (from the bottom of the bowl) and the deeper one the water is about 1/2 inch above the first curve. Curve is the first change in shape from the exit point.
The tank water height is the same on both.
After flushing the lower one fills to about 1/2 inch higher than its final level ( It fills then drains about 1/2 inch).
Variations in the casting process ??
Flummoxed in Flushville
The tank water height is the same on both.
After flushing the lower one fills to about 1/2 inch higher than its final level ( It fills then drains about 1/2 inch).
Variations in the casting process ??
Flummoxed in Flushville