bmixon
New Member
- Messages
- 8
- Reaction score
- 0
- Points
- 0
Hi. I am installing a new sink and vanity in a condo that my daughter just purchased. I have installed new hot and cold shutoffs valves and they seem to work fine. The problem is the drain line. The drain pipes do not line up and I was wondering whether a 1 1/4" offset of some type could fix this problem. I know I could just cut the 1 1/2" copper pipe in the back of the photo and shorten it and then install a new (1 1/2") 90 degree elbows and then install a reducer to fit a 1 1/4" drain pipe but is there an easy way to do this. Any comments or suggestions would be appreciated.
Attachments
Last edited: