Offgrid
New Member
I am installing a submersible pump and pressure tank system in an off grid location on a river in Ontario.
There are four buildings that will need water and they are at different elevations and spread out.
There is a shed by the river and another on an upper tier about 200 feet above the location of the pump intake in the river. Two of the lodging buildings are on the upper tier and two are below. My question is, should I put the tank and filters (25 micron and 5 micron ) in the lower building and pump to the upper building and then split to the lodging areas or put the tank and filters in the upper building.
Sorry if this sounds confusing, anyone that can give me some advise on location and sizing and equipment would be appreciated. There is abundant solar power and back up generator power available and cost is not a problem. Thanks
There are four buildings that will need water and they are at different elevations and spread out.
There is a shed by the river and another on an upper tier about 200 feet above the location of the pump intake in the river. Two of the lodging buildings are on the upper tier and two are below. My question is, should I put the tank and filters (25 micron and 5 micron ) in the lower building and pump to the upper building and then split to the lodging areas or put the tank and filters in the upper building.
Sorry if this sounds confusing, anyone that can give me some advise on location and sizing and equipment would be appreciated. There is abundant solar power and back up generator power available and cost is not a problem. Thanks