Robert Arceneaux
New Member
We bought a new construction home 7 months ago. It is a 4 bedroom/3bath home. The master and downstairs guest bathrooms come together at the main drain then run 20 feet or so outside the house. The other bathroom (upstairs), kitchen and utility room join the main drain just a few feet from exiting the house.
Only my wife and I are in the home daily with occasional (monthly at best) visits from our kids.
My wife works from the home with one of the two guest bedrooms serving as her office. Because of this, she uses the downstairs guest toilet during the day.
Since we moved in, the main drain has clogged but only after using this downstairs guest bathroom. We have increased the flush from 1.28 to 1.6 gpf and changed paper but we still get clogs. We have had the entire system checked and everything (slope and other design factors) appear good. No one uses excessive paper amounts and no feminine products are flushed, ever.
I am wondering if, because each flush only moves product a few feet and there is no regular use of the shower/sink that would provide flow to further product along, if this lack of "regular flow" on an almost daily basis, could create a situation where product accumulates to the point of clogging the main drain just past the juncture of the master and downstairs guest bathrooms (as this is where the blockage occurs).
Just seeking thoughts as everything we have tried everything, from changing habits, products and having the system fully checked, to no avail. I'm just thinking that the lack of a higher volume of flow would allow accumulation. Thoughts appreciated!
I uploaded a general schematic for info. Don't know if its much help though!
Only my wife and I are in the home daily with occasional (monthly at best) visits from our kids.
My wife works from the home with one of the two guest bedrooms serving as her office. Because of this, she uses the downstairs guest toilet during the day.
Since we moved in, the main drain has clogged but only after using this downstairs guest bathroom. We have increased the flush from 1.28 to 1.6 gpf and changed paper but we still get clogs. We have had the entire system checked and everything (slope and other design factors) appear good. No one uses excessive paper amounts and no feminine products are flushed, ever.
I am wondering if, because each flush only moves product a few feet and there is no regular use of the shower/sink that would provide flow to further product along, if this lack of "regular flow" on an almost daily basis, could create a situation where product accumulates to the point of clogging the main drain just past the juncture of the master and downstairs guest bathrooms (as this is where the blockage occurs).
Just seeking thoughts as everything we have tried everything, from changing habits, products and having the system fully checked, to no avail. I'm just thinking that the lack of a higher volume of flow would allow accumulation. Thoughts appreciated!
I uploaded a general schematic for info. Don't know if its much help though!
Attachments
Last edited: