how to remove pvc fitting

[davidxingyin]

I met a problem. If the PVC pipe was glued wrong, what should I do

 

[Sylvan]

CUT it out and replace it

 

[Sponsor]

 

[Fitter30]

Could use a tool like this one. They make them in all sizes. Cut fitting off above the socket and drill it out
https://www.homedepot.com/p/jsc-1-1-2-in-socket-saver-j44150/302575484

 

[IPDQKWID]

Just make sure you go in plumb. A 2" version of this saved me another floor bust out. An attempt in a ceiling hub, facing horizontal, resulted in a slight offset at the hub - I must have had the drill not completely level. The bit weakened the side of the hub, making it soft and nearly created a hole out the side. Cut it out and reglued two pipes and three fittings coming from the floor above. But the one in the cement floor - that was golden beautiful.