Floor Drains "no vents"concrete poured IPC

Users who are viewing this thread

1xhomebuilder

New Member
Messages
1
Reaction score
0
Points
1
Location
Utah
New Here..looking for some advice this is a mechanical room?(ac/furnace/ hot water heater) We are getting ready to tie into the upper dwv the 3" Soilstack will go to the WC above. The 2" Soilstack will service the shower/ tub in the same bath.
My question is ...is this ok? the floor drains ea @ 8' away from.the main line have no vent
Read in ipc that this is permissible within 15'
My concern is siphoning the p-traps dry in the mechanical room

Thanks for any help/reassurances

1000050498.jpg
 
Top
Hey, wait a minute.

This is awkward, but...

It looks like you're using an ad blocker. We get it, but (1) terrylove.com can't live without ads, and (2) ad blockers can cause issues with videos and comments. If you'd like to support the site, please allow ads.

If any particular ad is your REASON for blocking ads, please let us know. We might be able to do something about it. Thanks.
I've Disabled AdBlock    No Thanks