Distiller gravity drain to laundry room with airgap

Users who are viewing this thread

Hgitj38291

New Member
Messages
1
Reaction score
0
Points
1
Location
New Mexico
I have searched and not found any posts with similar issue. I have installed a mega-classic-distiller to my laundry room. The gravity drain is lower than the washer standpipe. What would be the best way to add a drain? There is a crawlspace under the floor. The outlet for the distiller drain is 2' above the floor.
 

Jeff H Young

In the Trades
Messages
8,954
Reaction score
2,235
Points
113
Location
92346
sounds like a perfect candidate for a floor sink tie the vent into the washing machine vent around 4 foot above finish floor you could just rough in like you would a shower and stub 2 inch (or even 1 1/2 ) through floor and then put a an increaser just strap your drain where it will have proper air gap
 
Top
Hey, wait a minute.

This is awkward, but...

It looks like you're using an ad blocker. We get it, but (1) terrylove.com can't live without ads, and (2) ad blockers can cause issues with videos and comments. If you'd like to support the site, please allow ads.

If any particular ad is your REASON for blocking ads, please let us know. We might be able to do something about it. Thanks.
I've Disabled AdBlock    No Thanks