Distiller gravity drain to laundry room with airgap

Users who are viewing this thread

Hgitj38291

New Member
Messages
1
Reaction score
0
Points
1
Location
New Mexico
I have searched and not found any posts with similar issue. I have installed a mega-classic-distiller to my laundry room. The gravity drain is lower than the washer standpipe. What would be the best way to add a drain? There is a crawlspace under the floor. The outlet for the distiller drain is 2' above the floor.
 

Jeff H Young

In the Trades
Messages
9,792
Reaction score
2,469
Points
113
Location
92346
sounds like a perfect candidate for a floor sink tie the vent into the washing machine vent around 4 foot above finish floor you could just rough in like you would a shower and stub 2 inch (or even 1 1/2 ) through floor and then put a an increaser just strap your drain where it will have proper air gap
 
Top