KeithHen
New Member
I'm not sure how old it is but maybe about 15 yrs., Gold. It's got the digital blue screen, model 01018857.
During Brine Rinse the salt brine tank begins to fill up with water.
Water drains out constantly from the exhaust hose during both the Backwash and Brine Rinse cycles. Total time is about 1 hr. & 50 minutes.
At every new generation cycle, water keeps rising until it finally reaches the tank's float.
Had service on it and they suspected a failed brine valve. This was not a Culligan service person.
I went to the Culligan store and explained the issue and they provided me with a new piston (I think it's the same thing as the valve). I changed it but didn't fix the problem.
I've removed the head and cleaned out all the openings, screens, all other areas that might have had blockages but all was pretty clean.
Any ideas of what else I could try?
Thank you!
During Brine Rinse the salt brine tank begins to fill up with water.
Water drains out constantly from the exhaust hose during both the Backwash and Brine Rinse cycles. Total time is about 1 hr. & 50 minutes.
At every new generation cycle, water keeps rising until it finally reaches the tank's float.
Had service on it and they suspected a failed brine valve. This was not a Culligan service person.
I went to the Culligan store and explained the issue and they provided me with a new piston (I think it's the same thing as the valve). I changed it but didn't fix the problem.
I've removed the head and cleaned out all the openings, screens, all other areas that might have had blockages but all was pretty clean.
Any ideas of what else I could try?
Thank you!