River Steve
New Member
Three months ago we ran our well to the cistern and started using the cistern to supply our house. The cistern was cleaned, the submersible pump was pulled at that time to have it out of the way. It was put back in place with a new inline back flow preventer as the one built into the top of the pump was not holding pressure. It cycles on and off just fine, everything works as it should except in the last week the pump has started to pulse as it fills the pressure tank. Any idea what might be causing this issue?
I have replaced the pressure switch and the pressure tank, I had a spare for both. When I let water run in the tub and go out to the cistern I can feel the pump pulsing the water line.
I have replaced the pressure switch and the pressure tank, I had a spare for both. When I let water run in the tub and go out to the cistern I can feel the pump pulsing the water line.