Trevorvelu
New Member
- Messages
- 1
- Reaction score
- 0
- Points
- 0
Hello
I have installed plumbing including a ciculatory pump for baseboard heat, in my basement. The Burnham Series 2 Furnace has an Argo ARM-2P Electrical Box with 2 (First Floor and Upper Bedroom Floor) Thermostat wires connected.
The unit has a transformer that, according to the user manual online, can handle up to 15 zones. It also has a terminal that provides 24 VAC that is unused.
I would like advice on how to connect the added Circulatory Pump and the Thermostat for the Basement.
I am unable to upload The Argo -P2 diagram as my fle is 2470 x 3492 and this attachment option can only accept 700 x 700, and I don't know how to reduce it in size.
Thank You
Trevor
I have installed plumbing including a ciculatory pump for baseboard heat, in my basement. The Burnham Series 2 Furnace has an Argo ARM-2P Electrical Box with 2 (First Floor and Upper Bedroom Floor) Thermostat wires connected.
The unit has a transformer that, according to the user manual online, can handle up to 15 zones. It also has a terminal that provides 24 VAC that is unused.
I would like advice on how to connect the added Circulatory Pump and the Thermostat for the Basement.
I am unable to upload The Argo -P2 diagram as my fle is 2470 x 3492 and this attachment option can only accept 700 x 700, and I don't know how to reduce it in size.
Thank You
Trevor