thermostatic mixer valve

  1. Martin Cooney

    Where should recirculating pump be placed?

    I have a heat pump water heater with a thermostatic mixing valve, expansion tank, vacuum breaker valve and a recirculating pump. My system does not have a dedicated return line so APCOM BPV Aqua-Flash Bypass Pressure Relief Valves are installed at sinks at the end of each circuit. Placement of...
  2. KillSwitch

    Two 50 Gal Parallel HWTs w/ Softener + Thermostatic Mix Valve

    Welcome open and honest feedback from experts on my attached diagram to parallel two 50 gal electric tanks with thermostatic mixer, using 10 micron house filter and water softener. I prefer the two 50 gal tank vs an 80 or 100. Both tanks will be set at 140 deg. Welcome questions and...
  3. Xander Fulton

    K-2976 Showerhead water flow vastly lower after remodel adds twin ell

    Searching around on Google for this topic keeps bringing me to threads on this forum, although in reviewing them none seem to be exactly what I'm experiencing. So, time to create an account and ask, I guess! In a tearing-the-bathroom-down-to-the-studs remodel, we went with a Kohler...
Top
Hey, wait a minute.

This is awkward, but...

It looks like you're using an ad blocker. We get it, but (1) terrylove.com can't live without ads, and (2) ad blockers can cause issues with videos and comments. If you'd like to support the site, please allow ads.

If any particular ad is your REASON for blocking ads, please let us know. We might be able to do something about it. Thanks.
I've Disabled AdBlock    No Thanks