new construction

Hello, I am a gal who underestimated how tight my budget is for this ADU build in Lewis County, WA State. Therefore, I have to tackle this myself & hoping you all can give me a hand along the way? I have scoured books and videos on pipe sizing etc, became familiar with the UPC ( my county...

Hey all, I'm a plumbing designer working in Texas - I have designed my fair share of apartments. Does anyone work as a plumbing contractor in the state, specifically with multifamily jobs? I have a few dissenting opinions in the office on the best way to route a typical bathroom. I've done HWV...

I'm installing a toilet in a bathroom basement. The drain pipe is 4" and the flange is designed to fit inside it. I cut the drain pipe flush with the floor. I dry fit the flange about half way, pulled it out and primed/glued it back in only it wouldn't go all the way down. It sat about 1/2"...

Let me start by saying, I'm handy, but not a plumber. I recently finished my basement, including a full bath myself. Everything is closed up and now I have no water at my shower head. I know I should have tested this before closing everything up. I installed the Moen 2590 Posi-Temp valve. I...

I am looking to buy a dual fuel heat pump and propane system online. I need 40000 BTU'S heating and 24,000 Cooling. It also has to be a 2 stage compressor and at least 16 SEER efficiency for a local energy coop rebate. It also needs to be at least 95 percent efficiency furnace. The problem I...