1. Jasonir129

    Treating Iron Bacteria and low pH and moderate radon

    Hi all, I'm looking to add and modify my current filtration circuit which consists of: 1) well tank 2) injection port with static mixer (stenner peristaltic pump pulls from tank with 2 parts water to 1 part 17% sodium hydroxide to raise pH) 3) retention tank (this is the one...
  2. GLT

    Wrong Injector in Fleck 5810?

    I believe my Fleck 5810 softener has the wrong injector installed and need some advice on what to do. I have a 9x48 tank with 1 cu/ft resin and city water at 15 grains. My valve has a White injector which I think belongs in at 14"-16" tank. My 9" tank should have a Violet injector according to...
  3. Joe Athwal

    Clack Ws1 AIO iron filter conversion

    Hey yall, I right now have a softener and iron breaker, both clack ws1 from charger water treatment products. They are also both 1.5 cubic ft. I have a relatively large house with a family a 5 and I want to upgrade my iron filter from a 1.5 cubic ft 10x54, to a 2.5 cubic ft 13x54. The injector...
  4. John Williamson

    Lawn Sprinkler Chemical Injection

    As a lockdown project I'm trying to complete a lawn sprinkler system I started last year (in the previous lockdown). I have two sprinklers which are on timers to irrigate my lawn which work really well. My pressure at the tap is 46 PSI (approx. 3.17 bar). I would like to be able to inject/mix...
Hey, wait a minute.

This is awkward, but...

It looks like you're using an ad blocker. We get it, but (1) can't live without ads, and (2) ad blockers can cause issues with videos and comments. If you'd like to support the site, please allow ads.

If any particular ad is your REASON for blocking ads, please let us know. We might be able to do something about it. Thanks.
I've Disabled AdBlock    No Thanks