fleck 5812

  1. tdamisch

    Where to buy Fleck 5810?

    What retailers do you all suggest for purchasing a softener with a Fleck 5810 series? Going to be doing the install myself.
  2. Shakaworld

    Water softener regeneration

    Currently I have a 10x54 tank installed with a Fleck 5600 head for a water softener with 1.5 cf resin going to a 13x54 tank with a Fleck 5812 head with 2.5/3 cf resin - in order regenerate would there be any issue during the regeneration process with the larger tank as far as the amount of resin...
  3. Dmlaero

    Settings for Fleck 5812 SXT w/ 2.5 cu-ft Resin Tank

    Do the settings below look correct? Seems like the capacity should be more like 60,000 grains to be closer to the "ideal" salt dose of 8 lbs per cu-ft (@24,000 grains/cu-ft). What actually controls salt dose? I assume the BLFC and Injector have a role, but do any of the settings affect it...
  4. Dmlaero

    Replace Culligan Medalist Plus w/ Fleck 5800-series or Clack WS1.25

    I'm looking for advice on replacing a Culligan Medalist Plus Model 30 water softener installed in the 2006 timeframe. It is not completing the regeneration cycle due to E1 and E2 errors. Not sure if it's a sticking filter pack or a weak motor. Sometimes I can get it to complete the cycle if I...
Top
✖
Hey, wait a minute.

This is awkward, but...

It looks like you're using an ad blocker. We get it, but (1) terrylove.com can't live without ads, and (2) ad blockers can cause issues with videos and comments. If you'd like to support the site, please allow ads.

If any particular ad is your REASON for blocking ads, please let us know. We might be able to do something about it. Thanks.
I've Disabled AdBlock    No Thanks