desolder

Hi all, Novice here. I looked at various threads on this topic, but I’m still confused on how best to tackle my issue. I want to remove the brass delta adapter to put a delta slip on tub spout with a plastic insert with o-ring and set screw. I do not want to just get a different spout that...

I'm doing a kitchen remodel and the existing ice maker stub out needed to be rotated 90 degrees. so I shut off the water, drained the water lines, used a shop vac to vacuum out as much water as possible, heated the joint with a propane torch and after a minute the joint was loose enough to move...