Search results

My hardness level is set at 6. 100 ppm/17.1 = 5.847 grains, rounded it up to 6

Ah ok that make sense, well then sounds like the only issue then is the drain line, thanks for the help

Thank you for this, I will re-route the overflow tube and make it its own separate drain line. The overflow safety float will need to be looked at as I dont think its functioning properly as well.

So it seems as though when the first cycle of the regeneration process which is the back wash, when the resin tank is cleaning itself water is being pushed out of it, but what also is happening is in the T connection, water is being pushed into the brine tank as well causing the overflow, seems...

https://www.amazon.com/dp/B010MR6T2I/ref=cm_sw_r_apan_glt_fabc_8YPY5K5QVTYHCAEJHK6S?_encoding=UTF8&psc=1 Blfc size is .50 gpm

Hello, I have a new system installed for 45 days now, 2 people live full time in my house and visitors from time to time. Wanted to know best settings for my new system, details below: Hardness: 100 ppm Chlorine: 5 ppm Alkalinity 120 ppm pH 9 Copper: .03 ppm Iron: .03 ppm Current settings...