Recent content by Pesh115

Sadly, the Carlyle II toilet which has been sitting in a box for years due to COIVD delays on remodel had a crack in rear near drain connection. After speaking to Toto, the toilet is not safe to install. Consequently, it is a non-starter. We'll be using a Kohler 1-piece Santa Rosa Toilet...

Yeah, the floor is porcelain tile :( I've been using a tile bit to get started followed by a masonry bit with a hammer drill. These are all first-floor installations. Once I get thru the tile, then i'm into the foundation. I will try to test fit it and see if the toilet will even set on...

Terry - Thanks for the quick reply. From the pictures, does the less-than-half-inch gap between the wall and the back of the adapter worry you? I'm suspecting the toilet will be approx 1/4 -to - 1/2" from wall after installed. Is that ok?

Replacing the rusted escutcheon is definitely part of my place. I have some tin snips that allow me to cut off the old one fairly easily. I've already got a chrome plated split escutcheon (not sure if its metal or plastic) from Home Depot. But before i worried about the escutcheon, I was...

I am in the middle of a series (three) of toilet upgrades in a relative new home (built in 2018) which has three bathrooms. The first two bathrooms had 12" from wall to rough-in center and the standard Toto 12" adapter worked great. I just removed the third and final toilet to find the...