Recent content by Eudmin

Gary, I think you missed my last message. I fit a Drake in to the 9" rough-in spot. It was 9" plus a smidge. I complained that installing a Drake in a 12 inch rough leaves a mile of space behind it, so I just tried it for this small spot and it fit.

Sorry. I totally would have, but I don't think the tank itself was the original. It was a normal tank from a toilet that the previous owners adapted to be a wall-mount by drilling holes in the back. Then they put 2" PVC from the tank drain about 4 feet down the wall to an elbow that connected...

When I run the hot water I swear I can smell something that's kind of like the smell/taste you get when you're raking leaves. I'm pretty sure this is just hot water, not cold. A search here turned up references to sulfur smells having to do with bacterial infections, but this doesn't smell...

Ah, I see. That explains what's happening on my shower when I use the little button valve on the showerhead to shut it off while soaping up. When I turn it back on it's hot as heck. How do commercial kitchen sprayers do it, then? Do they have some kind of built-in backflow preventers? I...

kitchen faucet suggestion? I'm looking to get rid of the old faucet with side-spray that's in my kitchen and replace it with one that has a pullout faucet. We do occasionally use the side-spray to rinse dishes after washing them, but I never liked how you had to have the water running to get...

Do you ship Toto's outside the NW area where you're located? Your shopping cart implies that the only delivery options are kind of local to you. I've been ordering porcelain from wherever online, but if you shipped cross country would buy from you. Posting here instead of emailing because...

In reading some of Ian's Cadet 3 posts someone referred to American Standard as something like "Central American Standard" because it's made in Mexico. Well I just installed a Toto Drake last night. The bowl was made in China, the tank was made in Mexico, and the seat was made in Canada...

Ian, Sorry, I'm not getting a Cadet 3. The Drake went in just fine. 10-3/4" Drake install!! The tank screwed down on the bowl nice and snug and actually comes within a hair of touching the back wall. I may have a hopeless condensation problem if that occurs, but I'll deal with that if it...

I leveled the toilet that I installed with some coins and then filled in the gaps along the bottom with some epoxy-based sanded grout. It's a slate tile floor, so it already had a bunch of sanded grout. It was pretty easy to get a nice clean line of grout by washing it with vinegar water. My...

I went to a local high-quality fixture store just to look today. I know it's not theoretically possible to get the Drake into my small space, but I just want to try it out. They had boxes with Drakes just sitting there and they also had Cadet 3 bowls with the 12" tank, but no 10" tanks. I...

The weird plumbing is fairly recent, you're right. We bought the place from some artists, complete with walls painted with chalkboard paint, a cupboard made from a salvaged crisper door from an old fridge, a mailbox which is a model of the house in miniature, and a ceiling made of red...

Did some more research, and I actually did find a part number for the combo of round front bowl and 10" tank. The A/S part number is 2384.010. There are a couple of supply places where you can get a spec sheet that shows the tank I mentioned with the bowl I mentioned. Looks like I couldn't...

great, that sounds like a winner! Thanks

Another challenge with replacing my basement toilet (aside from the 10-5/8 rough-in and the french drain between it and the wall) is that the toilet supply was installed about 4 feet up in the wall. They had an elevated tank toilet in there initially. Do they make those 3/8" to 7/8" toilet...

Yep, it does refer to the bottom of the bowl, but it seems that these Cadet 3 toilets have 3 different tanks with the tank gasket and bolts at 3 different spots which allows you to set the the entire thing either 10, 12, or 14 inches from the wall. So give up the part numbers for the...