edward M
New Member
I have a HCM 75 deep well pump that was loaded with rust and I was preparing to take it apart to put a new seal in and O ring however I lost water. I now believe that rust may have clogged the venture/jet. I have another HJ 75 deep well pump that was purchased on Craigs list which appeared very new. It was manufactured in Dec 2004 and I have it for about 4 years so I am guessing that it has 8 to 9 years of run time on it. I just put it in service and have the same results as the HCM 75 . As I stated I was beating the casing of the old Myers and maybe I put heavy rust down the well and it blocked the jet. Is there a way I can test the HJ 75 pump for vacuum to see if it is working properly. It is nosier than my 50 year old HCM 75. I am trying to avoid
digging to get to the well box and pull the complete package out to eyeball the venture/ jet. I should have left the HCM leak because it was reliable, BUT.
Thanks for any feedback.
digging to get to the well box and pull the complete package out to eyeball the venture/ jet. I should have left the HCM leak because it was reliable, BUT.
Thanks for any feedback.