Hello,
I've got a new well, 300' 40+gpm with water spec. at 6.8ph hardness at 96ppm turbidity at 15.1 ntu
chloride at 330 ppm? ( hard to read maybe 3.30ppm) Iron at 7.79 ppm with trace of hyd. sulfide.
I plan on using 2.5 cu ft. of Katalox lt. in a 13x54 tank with a fleck 5600 backwash head then to a
GE 40,000 gr. softner through my local big box store. ( want to maintain at least 9-10 GPM to house)
Questions, should I use a 4x20 filter after the KL, also should I use a chlorine injector to the KL, and if so can I
still use the fleck 5600??? I have a local plumber who wants to sell me a $6,000 system
I've got a new well, 300' 40+gpm with water spec. at 6.8ph hardness at 96ppm turbidity at 15.1 ntu
chloride at 330 ppm? ( hard to read maybe 3.30ppm) Iron at 7.79 ppm with trace of hyd. sulfide.
I plan on using 2.5 cu ft. of Katalox lt. in a 13x54 tank with a fleck 5600 backwash head then to a
GE 40,000 gr. softner through my local big box store. ( want to maintain at least 9-10 GPM to house)
Questions, should I use a 4x20 filter after the KL, also should I use a chlorine injector to the KL, and if so can I
still use the fleck 5600??? I have a local plumber who wants to sell me a $6,000 system