water conditioning

Hello, We have two tanks hooked up together, one is the water softener and I believe one is a water conditioner. Does that make sense to have two tanks set up like this? I do not believe the water conditioner has flow going through it as the flow indicator does not flash when running water...

We had a whole house water conditioner installed professionally awhile back (10x54 GAC and 10x54 TAC). The plumber ran a drain for backwash into the sewer and also installed a hose connector. We previously used the hose connector to water our lawn during the backwash cycle. However, we have...

In need of some help, ive been trying to fix a repco 5r45-2 water conditioner for the past couple days. The problem is its not cleaning any of the water even with enough salt in the brine tank the water still comes out of the faucet smelling like iron. Even after manually cycling, the water...

I bought a home with a fleck water softener with either a 2500 or 2750 head and either a 3200 or 3210 timer. It doesn't have a brine valve, just a hose going to the salt tank. I'm trying to make adjustments to improve water quality and wondered if not having a brine valve could be causing a...

Hello, I've got a new well, 300' 40+gpm with water spec. at 6.8ph hardness at 96ppm turbidity at 15.1 ntu chloride at 330 ppm? ( hard to read maybe 3.30ppm) Iron at 7.79 ppm with trace of hyd. sulfide. I plan on using 2.5 cu ft. of Katalox lt. in a 13x54 tank with a fleck 5600 backwash head then...

I am interested in purchasing a Fleck 5600sxt and using calculators online, I think a 48,000 grain would suit me but I wanted to get your input. I calculated our water hardness to be about 22-25 as that's the high end of the range. Our water comes from the city and the report can be found...