DYIWeller
New Member
I don't understand, new management or lighter product?IMHO Franklin today is not the same Franklin of yesterday. I think a lot of pump manufacturers are riding on the Franklin reputation.
Last edited:
I don't understand, new management or lighter product?IMHO Franklin today is not the same Franklin of yesterday. I think a lot of pump manufacturers are riding on the Franklin reputation.
This fab tool set; it hold a section of drop pipe as its getting pulled up, and this Fab tool set, is used for the disassembly of a section of pipe from leaning over and for support?I took a 6" coupling and machined it to drop over 6" casing. It has a socket on the side to hold a 1" piece of steel pipe 16' long which has a hoop at the top to contain the drop pipe. You can probably do the same thing for your 4" casing.
Good advice. I will lower the pitless adapter.You can certainly put more fill around the well, but I would rather see a new pitless installed and the line buried deeper.
What would be the recommended pump height for a 1 HP 10-15 GPM well pump?I'm not really understanding why the pump needs to be set so low with that much recovery but then I'm not a pumpman. Just seems like a lot of pump, a lot of wire, and a lot of pipe.
This is awkward, but...
It looks like you're using an ad blocker. We get it, but (1) terrylove.com can't live without ads, and (2) ad blockers can cause issues with videos and comments. If you'd like to support the site, please allow ads.
If any particular ad is your REASON for blocking ads, please let us know. We might be able to do something about it. Thanks.