Washing machine/laundry sink - critique

[Mikha'el]

Hi all - for some reason every example out there has the sink "downstream" of the WM standpipe.
If you would, please let me know if there's anything amiss with this schematic - using UPC:

Thanks,
Michael

 

[Terry]

Add a cleanout for the end of run and you're good.
Kitchen sink also gets a cleanout.

 

[Sponsor]

 

[Mikha'el]

Add a cleanout for the end of run and you're good.
Kitchen sink also gets a cleanout.

Got it, thank you.

 

[Reach4]

"1.5" in the lower right and the "2" above, are not compatible. Probable typo.

Lower right needs to be a long sweep.

 

[Mikha'el]

"1.5" in the lower right and the "2" above, are not compatible. Probable typo.

Lower right needs to be a long sweep.

Look again.

 

[Mikha'el]

Add a cleanout for the end of run and you're good.
Kitchen sink also gets a cleanout.

Double-checking - am I ok with a 2" san-tee for the WM drain, into a 3" bushing at the floor - or do I need to carry the 3" up?
Trying to keep the washer drain as low as possible.

Not sure how to read the DFU sizing - is it max 10 dfu for a 2" vertical drain (aka stack <3 stories)?
Do the kitchen sink and dishwasher count as 4 dfu?

EDIT: found it

Thanks,
Michael