Sprinkler zone not working

Users who are viewing this thread

Longhorn21

New Member
Messages
2
Reaction score
0
Points
0
Location
Austin, TX
I have a hunter sprinkler system and my zone 4 isn't working. I've put my multimeter on the com wire
and on my timer wire at the control box and I'm getting 24-25 volts. Then I go to the valves and put the multimeter on the wires at the valve solenoid and I get 24-25 volts, now when I hook all the wires up to the solenoid the volts drop to 0. I don't understand, I get power at the control box, so the wires under
ground get power at the valves, but when I hook them all up no power. Please somebody help this is
driving me nuts!!!!!
 
Top
Hey, wait a minute.

This is awkward, but...

It looks like you're using an ad blocker. We get it, but (1) terrylove.com can't live without ads, and (2) ad blockers can cause issues with videos and comments. If you'd like to support the site, please allow ads.

If any particular ad is your REASON for blocking ads, please let us know. We might be able to do something about it. Thanks.
I've Disabled AdBlock    No Thanks