B-in-Seattle
New Member
- Messages
- 3
- Reaction score
- 0
- Points
- 0
First off, I'd like to thank this forum and the advise it offers. I own an old 1915 craftsman in Seattle. There was an old cast iron/porcelain corner sink in the main bathroom. I took it out, installed a double vanity and was proud of how it turned out.......until the 2nd sink filled up when I ran water in the first sink. I'm not a plumber, but I knew this was wrong.
The sink is not clogged and I have not checked the roof vent as of yet. Attached is a very rough diagram of my "project gone wrong". Any advise is much apprecated.
The sink is not clogged and I have not checked the roof vent as of yet. Attached is a very rough diagram of my "project gone wrong". Any advise is much apprecated.